Datenbank

0046-A-Construction Stages

The example was created by

Dr.-Ing. Casimir Katz

and published on 29.08.2025 on

published. You can find it at https://evadat.com/de/bsp/0046/.

Currently it is being edited.

title-image.png
Developed by Dr.-Ing. Casimir Katz
Published on: 29.08.2025 | Qualified on: -
DE EN
A0Classification
  • ClassA · Analytical verification example
  • Structural system typeBar structure (general)
  • MechanicsStatics
  • Material lawElastic
  • MaterialGeneral
  • Verification formatDetermination of internal forces
A1Problem description
Original version

A bridge construction is errected with two single span prefabricated beams and an additional support. Then the end supports and the intermediate hinge will be closed. and the interim support is removed. What is the moment distribution for this construction stage?

Balken.jpg

The total span of the beam is 2 x 20 m. The uniform loading should be taken to 30 kN/m.

The section and naterial may be choosen freely (e.g. a rectangular section 1500 mm height and 4000 mm wide)

The special target of this test is to show the work flow for this type of problem.

Vollständiges Beispiel ansehen

Wenn Sie die Referenzlösung, die Bearbeiter-Ergebnisse und die Bewertung sehen möchten, loggen Sie sich bitte ein.

Sie haben schon ein Konto?

Hier anmelden

Sie haben noch kein Benutzerkonto?

Hier registrieren
A5References

No references have been added yet.

Editors
Dr.-Ing. Casimir Katz SOFiSTiK AG (Garching, Germany)
–
Creator
Dr.-Ing. Casimir Katz SOFiSTiK AG (Garching, Germany)
SOFiSTiK FEA (2025) SOFiSTiK AG
Editor 1
Dr.-Ing. Casimir Katz Creator, Editor 1

SOFiSTiK AG (Garching, Germany)

Software used: SOFiSTiK FEA (2025) SOFiSTiK AG